If you need the height and want a headrest, look no further than the 3150HR Two-Step Task Stool. With adjustable headrest, seat depth, two-step footrest, and a 550-pound weight capacity, this model provides all the comfort and durability needed for a 24/7 intensive use stool. Covered by our unbeatable Concept Seating Warranty and available with casters or glides.
10 Color / Fabric Options
Next Chair:3152 Two-Step Task
Seven legs means 20% ease of movement and more stability over five leg chairs. This is especially important for larger individuals that find moving in their chair difficult. Steel construction with metal strength ring and tested to 10,000lb dynamic load, our base is unmatched in strength and stability.
Infinitely adjustable lumbar support puts back pressure relief at your fingertips. Adjustable back insures lumbar is exactly where you want it.
This model also features a height-adjustable backrest. Raise or lower it to one of 6 positions to fit your body type and fine-tune the lumbar support.
Make your chairs new again by swapping out covers and extend the life of your 24/7 chair all within a matter of minutes. The bottom cover is held on by Velcro and the backrest cartridge can be swapped out easily with a screw driver.
Not a better warranty in the business. 24/7 warranty that covers normal wear and tear for people up to 550lbs for 6 years. Compare to a standard warranty that only covers defects in workmanship and parts. Contact us for more details.
You may not notice it in the first 10 minutes, but you may after the first shift. You will certainly notice it after weeks, months and years of prolonged seating in a Concept Seating chair. You’ll just feel better. You just might not know why. The chair you have just been sitting with its Ergo Air Suspension System has kept the blood and oxygen flowing through your body, especially through the lower extremities improving blood flow and increasing oxygen levels to tissues.
Two point stem, shock absorber and special bore construction provides an extremely smooth and quiet swivel and roll not found in standard casters. Once the chair is sat in, the brake is released and allows the chair to roll freely. This is important for large people that need to put weight on the arms to be able to sit. Spring shock absorber prolongs the life of the caster as well as the chair. Closed Construction reduces the amount of dirt and hair that can get into the caster, prolonging the life of the caster.
Easily adjust the width of the armrests to accommodate a larger person or a person with a duty belt just by sliding out the arms. Adjustment is made by loosening the thumb screw and adjusting to the desired width. Adjustable to 2.5” on both sides.
Our goal is to provide proper ergonomic support for 4% female size (approximately 5’ 0”) to the 97% male (approximately 6’ 5”). Height and depth adjustments are at your fingertips.
Recline to one of five desired positions and keep it there with the push of a button.
The 2:1 Syncro tilt keeps your knees and legs in an ergonomically correct position while allowing you to comfortably recline. For every 2 degrees of back recline, the seat reclines 1 degree maintaining ergonomic comfort.
This chair comes with a slight forward tilt. This position can be locked out to prevent the forward tilt.
The C Loop armrest comes standard on this chair. As an alternative option the swing arms pads provide a large comfortable resting place for your arms. The pads adjust fore and aft as well as in and out. The brackets themselves are also adjustable to provide and extra 5” of width (2.5” per side). The arms will fold out of the way at the touch of a button but are strong enough to hold people of 550lb.
When it is desired that you want the chair to be a bit more stationery, choose glides as an alternative. Strong and at the same height as our 60mm caster, the glide make the chair easy to maneuver when needed, but in place when needed. Often times used in on ships.
The articulating headrest can be used as a headrest, neck roll or swung out of the way. Adjustable in height to 6 positions, it allows you to sit according to the task at hand.
Set the headrest to the desired height. Adjustable to 6 positions.
The look and feel of leather with the breathability of fabric.
Put your logo or design right on the chair and add a personal touch of class to your project. Great for increased brand awareness.
A simple and effective solution for protecting and preserving the surface of your chair.
Concept Seating Slipcovers are easy to put on and take off, and are made with a breathable, stretchy athletic fabric which is machine washable. These Slipcovers thrive in multi-shift environments by preventing the sharing of mess and bacteria between employees. Workers can each use their own Slipcover and take it home at the end of the day.