A task chair that handles 550lbs, comes with a 6 year warranty that takes care of normal wear and tear, adjustable lumbar, seat depth adjustment, 2:1 recline ratio tilt and adjustable back. This isn't too good to be true, this is the 3150 from Concept Seating.
Next Chair:3150HR Operator
Seven legs means 20% ease of movement and more stability over five leg chairs. This is especially important for larger individuals that find moving in their chair difficult. Steel construction with metal strength ring and tested to 10,000lb dynamic load, our base is unmatched in strength and stability.
Infinitely adjustable lumbar support puts back pressure relief at your fingertips. Adjustable back insures lumbar is exactly where you want it.
Make your chairs new again by swapping out covers and extend the life of your 24/7 chair all within a matter of minutes. The bottom cover is held on by Velcro and the backrest cartridge can be swapped out easily with a screw driver.
Not a better warranty in the business. 24/7 warranty that covers normal wear and tear for people up to 550lbs for 6 years. Compare to a standard warranty that only covers defects in workmanship and parts. Contact us for more details.
You may not notice it in the first 10 minutes, but you may after the first shift. You will certainly notice it after weeks, months and years of prolonged seating in a Concept Seating chair. You’ll just feel better. You just might not know why. The chair you have just been sitting with its Ergo Air Suspension System has kept the blood and oxygen flowing through your body, especially through the lower extremities improving blood flow and increasing oxygen levels to tissues.
Two point stem, shock absorber and special bore construction provides an extremely smooth and quiet swivel and roll not found in standard casters. Once the chair is sat in, the brake is released and allows the chair to roll freely. This is important for large people that need to put weight on the arms to be able to sit. Spring shock absorber prolongs the life of the caster as well as the chair. Closed Construction reduces the amount of dirt and hair that can get into the caster, prolonging the life of the caster.
Our goal is to provide proper ergonomic support for 4% female size (approximately 5’ 0”) to the 97% male (approximately 6’ 5”). Height and depth adjustments are at your fingertips.
Easily adjust the width of the armrests to accommodate a larger person or a person with a duty belt just by sliding out the arms. Adjustment is made by loosening the thumb screw and adjusting to the desired width. Adjustable to 2.5” on both sides.
Recline to one of five desired positions and keep it there with the push of a button.
This chair comes with a slight forward tilt. This position can be locked out to prevent the forward tilt.
The 2:1 Syncro tilt keeps your knees and legs in an ergonomically correct position while allowing you to comfortably recline. For every 2 degrees of back recline, the seat reclines 1 degree maintaining ergonomic comfort.
The C Loop armrest comes standard on this chair. As an alternative option the swing arms pads provide a large comfortable resting place for your arms. The pads adjust fore and aft as well as in and out. The brackets themselves are also adjustable to provide and extra 5” of width (2.5” per side). The arms will fold out of the way at the touch of a button but are strong enough to hold people of 550lb.
When it is desired that you want the chair to be a bit more stationery, choose glides as an alternative. Strong and at the same height as our 60mm caster, the glide make the chair easy to maneuver when needed, but in place when needed. Often times used in on ships.
The look and feel of leather with the breathability of fabric.
Put your logo or design right on the chair and add a personal touch of class to your project. Great for increased brand awareness.